Author Guideline and advice on SAI block off plates install  (Read 16006 times)

0 Members and 2 Guests are viewing this topic.

  • Offline tatane   au

    • Daytona Member  ‐    12
    • **
    • Topic Author

    Offline tatane

    • Daytona Member
    • **
    • Topic Author
    • Posts: 12
    • Bike: daytona moto2
    • City / Town: Perth
    • Country: au
    Guideline and advice on SAI block off plates install
    on: October 14, 2023, 07:33:45 pm
    October 14, 2023, 07:33:45 pm
    Hello everyone,

    I am about to install the SAI block plates. For those who have done it. How difficult is it? Any tips and tricks to do it properly? Once install and the servo-motor removed, do I need some sort of bracket to hold the airbox? Did you use threadlocker? How much torque etc.
     :763:
    Jonathan

  • Online Pangowin   us

    • Daytona Member  ‐    34
    • **
      #1

    Online Pangowin

    • Daytona Member
    • **
    • Posts: 34
    • Bike: Daytona Moto2
    • Number: #290
    • Country: us
    Re: Guideline and advice on SAI block off plates install
    Reply #1 on: October 15, 2023, 05:57:06 am
    October 15, 2023, 05:57:06 am
    It's a straightforward job, not difficult at all. You can reuse the stock bracket for the airbox.

  • Offline tatane   au

    • Daytona Member  ‐    12
    • **
    • Topic Author
    • #2

    Offline tatane

    • Daytona Member
    • **
    • Topic Author
    • Posts: 12
    • Bike: daytona moto2
    • City / Town: Perth
    • Country: au
    Re: Guideline and advice on SAI block off plates install
    Reply #2 on: October 15, 2023, 09:28:25 am
    October 15, 2023, 09:28:25 am
    *Originally Posted by Pangowin [+]
    It's a straightforward job, not difficult at all. You can reuse the stock bracket for the airbox.
    Thanks mate :)

  • Offline Tripler   us

    • Daytona Pro  ‐    141
    • ***
      #3

    Offline Tripler

    • Daytona Pro
    • ***
    • Posts: 141
    • "Cars move your body, motorcycles move your soul"
    • Bike: Moto2, CBR1k, SX1000
    • City / Town: Raleigh, N Carolina
    • Number: #88
    • Country: us
    Re: Guideline and advice on SAI block off plates install
    Reply #3 on: November 02, 2023, 04:56:22 pm
    November 02, 2023, 04:56:22 pm
    link for buying the plates? - thanks

  • Online Pangowin   us

    • Daytona Member  ‐    34
    • **
      #4

    Online Pangowin

    • Daytona Member
    • **
    • Posts: 34
    • Bike: Daytona Moto2
    • Number: #290
    • Country: us
    Re: Guideline and advice on SAI block off plates install
    Reply #4 on: November 03, 2023, 09:28:52 am
    November 03, 2023, 09:28:52 am
    *Originally Posted by Tripler [+]
    link for buying the plates? - thanks

    https://www.ukracesupport.com/products/triumph-street-triple-765-r-s-rs-2017-complete-sai-eliminator-kit-with-block-off-plates?variant=31312003956778 this is the kit I used. Driven makes a kit as well but you may.need a resistor with it.

  • Offline Tripler   us

    • Daytona Pro  ‐    141
    • ***
      #5

    Offline Tripler

    • Daytona Pro
    • ***
    • Posts: 141
    • "Cars move your body, motorcycles move your soul"
    • Bike: Moto2, CBR1k, SX1000
    • City / Town: Raleigh, N Carolina
    • Number: #88
    • Country: us
    Re: Guideline and advice on SAI block off plates install
    Reply #5 on: November 22, 2023, 03:00:50 pm
    November 22, 2023, 03:00:50 pm
    I just read this reply on www.triumphrat.net:
    #4 Feb 21, 2020
    All you need is a marble. Pull the hose off the airbox, grease up a marble and push it into the hose on the airbox end, about 1 inch into the hose, and then reconnect it to the airbox. 100% disabled SAI, free, and takes a couple minutes plus it is reversable... It would also still look stock to a dealer or anyone that is looking

  • Offline tatane   au

    • Daytona Member  ‐    12
    • **
    • Topic Author
    • #6

    Offline tatane

    • Daytona Member
    • **
    • Topic Author
    • Posts: 12
    • Bike: daytona moto2
    • City / Town: Perth
    • Country: au
    Re: Guideline and advice on SAI block off plates install
    Reply #6 on: December 10, 2023, 11:21:25 pm
    December 10, 2023, 11:21:25 pm
    Yes a marble would work too. I just wanted to confirm that the job is pretty straight forward. You can re-use the bracket for the airbox. I used the smarmoto module, no issues and no engine light.

  • Offline Coolflame   us

    • Daytona Member  ‐    26
    • **
      #7

    Offline Coolflame

    • Daytona Member
    • **
    • Posts: 26
    • Bike: 2020 Daytona 765 m2
    • City / Town: Kansas
    • Country: us
    Re: Guideline and advice on SAI block off plates install
    Reply #7 on: January 20, 2024, 07:35:29 pm
    January 20, 2024, 07:35:29 pm
    I could be wrong but tune ecu can turn the sai system off. If you are able to do that would there be a point in installing the block off plates?

  • Online Pangowin   us

    • Daytona Member  ‐    34
    • **
      #8

    Online Pangowin

    • Daytona Member
    • **
    • Posts: 34
    • Bike: Daytona Moto2
    • Number: #290
    • Country: us
    Re: Guideline and advice on SAI block off plates install
    Reply #8 on: January 21, 2024, 08:12:57 am
    January 21, 2024, 08:12:57 am
    *Originally Posted by Coolflame [+]
    I could be wrong but tune ecu can turn the sai system off. If you are able to do that would there be a point in installing the block off plates?

    From what I've read disabling SAI in TuneECU just prevents the CEL from coming on when you remove the solenoid.