Author Racetorx Throttle Spacer  (Read 213 times)

0 Members and 1 Guest are viewing this topic.

  • Online jamiea1991   gb

    • Daytona Member  ‐    19
    • **
    • Topic Author

    Online jamiea1991

    • Daytona Member
    • **
    • Topic Author
    • Posts: 19
    • Bike: Daytona 765
    • Country: gb
    Racetorx Throttle Spacer
    on: November 21, 2022, 10:14:31 pm
    November 21, 2022, 10:14:31 pm
    Hi Everyone,

    I have this just installed this evening the new racetorx throttle spacer to remove the free play from the throttle. I have to say itís worked really well and can thoroughly recommend to anyone. Itís really inexpensive and easy to fit too. Took me around 5 minutes to do.

    I however have noticed something with regard to my bar end and bar weights as I was installing. The bar end is actually loose inside the bar on the throttle side, it rotates and with a little force can actually be pulled out from the bar. I know there are a couple of holes in the bar and tabs on the bar end assembly but I canít seem to get them to relocate. I have no idea how they ended up out in the first place as I know they can be a pain to get out! Any ideas to relocate them?